Description

Makita DHR243RMJV 18v SDS Rotary Hammer and Dust Extraction 2 x 4.0Ah Batt

DHR243 models are 24mm (15/16") Cordless Combination Hammers powered by 18V Li-ion Battery. Featuring efficient maintenance free Brushless DC motor, which provides higher productivity than that of 18V Cordless Combination Hammer model BHR202. Able to drill in concrete as fast or faster than 24V Cordless Combination Hammer model BHR200. Quick change drill chuck. The DHR243 is Makita’s first cordless combination hammers with dust extraction system, designed to collect dust effectively with the on-off operation of the tool's on-off trigger switch interlocked with this system. The Dust Extraction System uses a High Efficiency Particulate Air (HEPA) filter, which is widely regarded as the ultimate filter that traps all sizes of particles with an efficiency rating of 99.75%. Supplied with 2 x 4.0Ah Lithium-Ion Battery Packs in a MakPac Type 4 Connector Case.

Features:

• Able to drill in concrete as fast or faster than 24V Cordless Combination Hammer model BHR200.
• One touch slide chuck for SDS-plus bit.
• Includes DX02 Dust Extraction System
• With Quick Change Chuck
• Easy-to-grip handle ergonomically designed to: • give maximum power thrust • provide a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip.
• 3 mode operation • Rotation + Hammering • Hammering only • Rotation only
• The tool body is seperated into the upper and lower housings at the foot of handle portion where the houses are jointed with vibration absorbing cushion rubbers.
• Higher productivity than model BHR202 achieved by using efficient Brushless DC motor to reduce energy loss by 30%
• Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact.

Technical Specification:

• Battery Type - Lithium-Ion
• Voltage - 18v
• Capacity in Concrete - 24mm
• Capacity in Steel - 13mm
• Capacity in Wood - 27mm
• Quick Change Chuck
• Impact energy - 2.0J
• Blows per minute - 0 - 4700bpm
• No Load Speed - 0 - 950rpm
• Vibration: Drilling - 3.5 m/sec²
• Vibration K factor - 1.5 m/sec²
• Vibration: Hammer Drilling - 13.5 m/sec²
• Vibration: Chiselling - 10.5 m/sec²
• Net weight - 3.4kg

In the Box:

• DX02 Dust Extraction System
• DC18RC Fast Charger
• 2 x BL1840 4.0Ah Li-Ion Battery Packs
• Quick Change Drill Chuck
• Depth Gauge
• Side Grip
• MakPac Type 4 Connector Case